ipmi/power-confirm-timeout¶
How long a Redfish power action waits for the system to reach the requested power state.
A whole number of seconds. Applies to the poweron, poweroff, powersoft
and powercycle actions on the Redfish driver.
A reset is a request, not a result. A BMC reports PowerState: Off as soon
as it accepts a power-off, while the platform is still shutting down, and a
power-on issued during that window is accepted with no error and silently
dropped. The action therefore re-reads PowerState after sending a reset and
re-sends it, up to this timeout, until the system reports the state that was
asked for.
The default is 300 seconds. Raise it for a platform that takes longer to
settle than that.
Setting this to 0 disables confirmation: the reset is sent once and the
action returns without checking whether it took. That restores the behavior
of releases before confirmation was added, and is only appropriate for a
caller that cannot afford to block.
Objects that Reference ipmi/power-confirm-timeout¶
Not used in current content packs
Objects used by ipmi/power-confirm-timeout¶
Not used in current content packs