Skip to content

esxi-build-isos/acceptance-level

Defines the built ISO Acceptance Level based on the added VIBs.

Allows setting the ISO build AcceptanceLevel. Note that this is HIGHLY dependent on every single VIB Module which must be at the defined AcceptanceLevel specified, or higher to build successfully.

By default this value is set to VMwareCertified. This means that all VIBs must be signed by VMware.

For building ESXi ISOs with the RackN DRPY Agent VIB in it you will generally need to set CommunitySupported unless you have been provided with the DRPY Agent VIB that has been signed by VMware.

Customers MUST OBTAIN PERMISSION directly from VMware to be allowed to use the VMware signed VIB. This is not a decision that is within RackN's ability to make.

The values that this Param can be set to (in order of highest level to lowest), is:

  • VMwareCertified
  • VMwareAccepted
  • PartnerSupported
  • CommunitySupported

Objects that Reference esxi-build-isos/acceptance-level

Objects used by esxi-build-isos/acceptance-level

Not used in current content packs