Skip to content

bios-driver

Driver that drp-bioscfg should use for working with BIOS settings

This parameter lets the bioscfg command know what tooling it should use to get and set BIOS configuration values on a machine. The current options are :

  • dell which will use racadm to get and set BIOS settings via racadm get.
  • hp which will use conrep to get and set BIOS settings.
  • lenovo which will use onecli to get and set BIOS via onecli config.
  • supermicro whicl will use sum to get and set BIOS settings.
  • cisco which will use the CIMC XML API out-of-band.
  • redfish which will use the ipmi plugin's getBios and setBios actions to get and set Redfish BIOS attributes through the BMC. This requires the ipmi plugin, the ipmi/address, ipmi/username, and ipmi/password params, and ipmi/mode set to redfish. Attribute names are the Redfish names; a BIOS.Setup.1-1/ prefix is removed. Changes are staged in the BMC pending settings and applied on the next reboot, or as set by ipmi/bios-apply-time.
  • none which does nothing.

Support for other BIOS configuration tooling is welcome.

Objects that Reference bios-driver

Objects used by bios-driver

Not used in current content packs